How to get deck stain off vinyl siding?
Using something like Pine-Sol or Simple Green, apply the cleaner to the stain and let it sit for longer—about ten minutes. Use your scrub brush (make sure that your brush is soft bristled, so you don't scratch the vinyl siding), scrub the stain after the pine cleaning product has set for ten minutes or longer.
- Stripper is available at Home Depot or other hardware stores that sell Behr products.
- Spray the cleaner onto the stained areas and allow it to set for 20-30 minutes.
- Use the sponge or cloth to scrub the stain away.
- Repeat until the stain is removed.
- Rinse the area thoroughly with clean water.
Vinegar is acidic so, normally, it's actually used to remove stains. Issues can arise when vinegar is left to sit on decking for too long, as doing so can seep the color out of the wood. Using undiluted vinegar is especially harmful, as the stronger concentration results in even more acidity that can damage your deck.
Cabot® Wood Stripper. Complete your deck stain prep with Cabot Wood Stripper. This product is specially formulated to remove both water- and oil-based finishes from all surfaces.
Rubbing alcohol is highly effective at removing these stains. If the stains are being stubborn and not coming out, then pour the rubbing alcohol into the container. Allow it to sit for a few minutes. When the plastic is not a container, or the outside of the container, you cannot simply let the object soak.
If you're looking for the best vinyl siding cleaner, Scotts Outdoor Cleaner Plus OxiClean™ is a great place to start. It'll remove mold or mildew from your vinyl siding. The OxiClean™ in the solution will help fight tough stains that other vinyl siding cleaners can't remove.
Some good cleaning solutions include: Mix 70 percent water and 30 percent white vinegar together to make a good all-purpose cleaner that's easy on vinyl. The vinegar can cut through virtually any stain or mark – even light mold and mildew.
Wash the Vinyl Siding on Your Home
Create a solution using Dawn and warm water to gently clean siding that's covered in dirt, moss, or mold. Coat the siding with the mixture, let it soak, and then hose it off.
Dish soap or laundry soap mixed with warm water are efficient at cleaning your siding. Oxygenated non-chlorine bleach like Oxy-Clean or a natural cleaning solution like Simple Green are both environmentally kind choices.
Unlike other exterior cladding, vinyl siding only requires periodic cleaning with mild soap and water from a garden hose.
Can you use magic eraser on vinyl siding?
PREP: CHOOSE YOUR MAGIC ERASER.
Clean's best way to clean vinyl siding is with the toughest tool around, the Mr. Clean Magic Eraser Extra Durable. Plus, with this simple tool, you can say goodbye to pressure washing vinyl siding and hello to the power of legendary clean!
Some cleaners can chemically react with the vinyl composition, so it's important to use gentle cleaners with inorganic solvents and water-soluble surfactants. For example, water, hydrogen peroxide, and anything containing alkyl sulfates is gentle enough to use on your vinyl siding.
For oil-based paint, you'll need mineral spirits, a piece of cloth and a soft-bristle brush. Wipe the paint using a piece of cloth dipped in mineral spirits. Let the mineral spirits sit for a few minutes before scrubbing them off. Repeat the process until the paint is removed.
If you're using a brush:
First, fill a bucket with a 10:1 mixture of water and Oil Eater® Cleaner Degreaser. Then hose down the section of siding you'll be cleaning. Now scrub the siding from top to bottom with the cleaning mixture, using enough pressure to clean without damaging the surface of the siding.
Bust grease with vinegar, castile soap, and baking soda.
Let it soak for about 10 minutes, then scrub the area with a cloth or soft-bristled brush. Vinegar, baking soda, and gentle soap are all safe for vinyl floors. Rinse the spot with clean water when you're done.